Nigerian College of Aviation Technology Job Recruitment, Tuesday 1, March 2016

The Nigerian College of Aviation Technology, Zaria is the foremost Approved Aviation Training Institution in Africa. It was established in 1964 with the mandate to produce highly skilled Aviation Professionals such as Pilots, Aircraft Maintenance Engineers, Air Traffic Safety Engineers, Air Traffic Controllers, Airline Cabin Crew Personnel, Flight Dispatchers and other spe…ts for the aviation industry.

Applications are invited from interested and suitably qualified candidates for the following Academic and Non-Academic positions in the College.

ACADEMIC AND NON ACADEMIC POSITIONS

A. FLYING SCHOOL

1. Principal Ground Instructor II CONPCASS 06

Candidates mast possess a good University degree not lower than second class lower in Meteorology, physics, Aeronautical, Mechanical or Electrical Engineering with evidence of Completion of National Youth Service plus Airline Transport Pilot license (ATPL). Fifteen (15) years post qualification cognate and instructional experience. Membership of appropriate leamed Society is an added advantage. Must not be more than Forty five (45) years old.

2. Ground Instructor- in Training CONPCASS 01

Candidates must possess a good University degree not lower than second class lower division in Meteorology. Physics, Aeronautical, Mechanical or Electrical Engineering with evidence of completion of National Youth Service and not more than thirty (30) years old.

B. AIRCRAFT MAINTENANCE ENGINEERING SCHOOL

1. AME Instructor-In-Training CONPCASS 01

Candidates must possess a University degree not lower than second class lower in Aeronautical or Mechanical or Electrical Engineering with NYSC discharge certificate.

2. AME Instructor III CONPCASS 02

Candidate must possess the qualification as specified in (1) above with Diploma in Aircraft Maintenance Engineering and AME license CAT» A» and “C” or “E and “lor ‘X” with at least three (3) years post qualification cognate experience or a masters in aeronautical engineering or related fjeld.

3. AME Instructor II CONPCASS 03

Candidates must possess the qualification as specified in (1) above with D’plorna n Aircraft Maintenance Engineerinq and AME license CAT “A and C’ or E and “T” or ‘X” with at least (6) six years post qualification cognate experience or a masters degree in aeronautical engiOeenng or related field with at least three (3) years post qualification cognate experience. Graduate membership of a professional engineering body and registration with COREN is an added advantage.

C. AERONAUTICAL TELECOMMUNICATION ENGINEERING

1. ATE Instructor II CONPCASS 03

Candidates must possess a University Degree not lower than second class upper in Electrical/Electronic, Telecommunication or Computer Engineering and ATSEP License with at least one (1) Rating. The Candidate should have at least three (3) years post qualification cognate experience.

2. ATE Instructor In Training CONPCASS 01

Candidates must possess a University degree not lower than second class upper in Electrical/Electronic, Telecommunication or Computer Engineering or Computer Science from a recognised University with NYSC discharge certificate.

3. Higher Technologist CONTEOISS 08

Candidates must possess Higher National Diploma not lower than Upper Credit in Electricall ElectronicEngineering or Science Laboratory (Physics with Electronics or Telecommunications) from a recognised institution or NCAT Diploma with ATSEP Licence with at least one (1) Rating. The Candidate should have at least three (3) years post qualification cognate experience. Training and/or experience on either solar power or wind energy or PlC or Microcontrollers is an added advantage.

4. Technologists CONTEOISS 07

Candidates must possess Higher National Diploma not lower than Upper Credit in Electrical! ElectronicEngine&ring or Science Laboratory (Physics with Electronics or Teelcommunications) from a recognised institution with NYSC discharge certificat& or NCAT Diploma with ATSEP Licence and at least one (1) Rating. Training andior experience on either solar power or wind energy or PLC or Microcontroiters is an added advantage.

D. AIR TRAFFIC SERVICES/COMMUNICATION SCHOOL

1. AVSEC Instructor-In-Training CONPCASS 01

Candidates must possess a University Degree not lower than Second Class lower division in Meteorology, Physics. Aeronautical. Mechanical or Electrical Engineering or any of the Physical Sciences plus NYSC Discharge Certificate or Exemption letter and not more than thirty (30) years of age.

2. Simulator Officer in Training CONTEOISS 06

Candidates possessing at least Higher National Diploma not lower than Upper Credit in Statistics orMathematics or Computer Science or Computer Engineering from a recognised tertiary institution plus NYSC discharge Certificate.

E. AVIATION MANAGMENT SCHOOL

1. AMS Instructor-in.Training CONPCASS 01

Candidates must possess a University degree not lower than second class lower in Aviation Management. Air Transport Management or Engineering from a recognized institution with NYSC discharge certificate.

2. ANtS Instructor III CON PC ASS 02

Candidates must possess a University degree not lower than second class lower in Aviation Management, Air Transport Management, or Engineering from a recognized institution with NYSC discharge certificate plus at least three (3) years teaching experience or possession of a Masters Degree in any of the

relevant areas.

3. Senior AMS Instructor CONPCASS 05

Candidates must possess a University degree not lower than second class lower in Aviation Management. Air Transport Management or Engineering from a recognized institution with NYSC discharge certificate plus at least three (3) years teaching experience. Possession of a Masters Degree in any of the

relevant areas above is mandatory, plus 10 years post qualification cognate experience. Corporate membership of a recognized professional body is an added advantage.

4. Principal AMS Instructor CONPCASS 07

Candidates must possess a University degree not lower than second class lower in Aviation Management. Air Transport Management or Engineering from a recoqnized institution with NYSC discharge certificate plus at least three (3) years teaching experience and a Masters Degree in any of the relevant areas.

Possession of a PHD is an added advantage, plus 15 years post qualification cognate experience and corporate membership of a recognized professional body.

F. TRAINING AIDS MAINTENANCE UNIT

1. Maintenance Engineers-In-training CONTEOISS 67

The candidates must possess a University degree not lower than second class lower or HNO not lower than lower credit in Electrical! Electronics/Computer Engineering from a recognised institution plus NYSC discharge certificate.

2. Maintenance Technicians (Air Conditioning, Computer Networks and Electrical Engineering) CONTEOISS 06

The candidates must possess NO in Computer Science or Electrical/Electronic from a recognisedPolytechnic plus 2 years cognate experience.

G. FLIGHT MAINTENANCE DEPARTMENT

1. Aircraft Maintenance Engineer II (Helicopter) CONTEOISS 09

Possession of Airframe and Power plant (A&P) license with ratings on B811206 Helicopters in addition to a NCAT diploma or higher qualification in Aeronautics or Mechanical Engineering from recognised Institution plus post graduation experience of at least three (3) years and not more than 40 years of age.

2. Aircraft Maintenance Engineer III (Helicopter) CONTEDISS 08

Possession of Airframe and Power plant (A&P) license with ratings on Bell 206 Helicopters in addition to a NCAT diploma or higher qualification in Aeronautics or Mechanical Engineering from recognised Institution and not more than 35 years of age.

3. Senior Aircraft Maintenance Engineer (Avionics) CONTEDISS 11

Possession of a B2 licence in addition to a NCAT diploma or higher qualification in Aeronautics or Electrical Engineering from a recognised Institution plus post graduation experience of at least nine (9) years and not more than 45 years of age.

4. Aircraft Maintenance Engineer III (Avionics) CONTEDISS 08

Possession of Basic ‘E’ & ‘I’ licence in addition to a NCAT diploma or higher qualification in Aeronautics or Electrical Engineering from recognised Institution and not more than 35 years of age.

5. Aircraft Maintenance Engineer II (Airborne Radio) CONTEDISS 09

Possession of Radio licence 12.1, 12.2 or 12.3 in addition to a NCAT diploma or higher qualification in Aeronautics or Electrical Engineering from recognised Institution plus at least three (3) years working experience and not more than 40 years of age.

6. Aircraft Maintenance Engineer III (Airborne Radio) CONTEDISS 08

Possession of Radio licence 12.1, 12.2 or 12.3 in addition to a NCAT diploma or higher qualification in Aeronautics or Electrical Engineering from recognised Institution and not more than 35 years of age. Working experience on airbome radio equipment is an advantage.

7. Aircraft Maintenance Engineer III A&P CONTEDISS 08

Possession of an A&P basic licence in addition to a NCAT diploma or higher qualification in Aeronautics or Mechanical Engineering from recognised Institution and not more than 35 years of age. Working experience on the Colleges fleet of Aircraft (Tampico TB9 or Trinidad TB20 or Beech Baron 58 or TBM850 or Diamond DA40Tdi) is an added advantage.

8. Store Engineers CONTEDISS 08

Possession of an A & P or E & I licence in addition to a NCAT diploma or higher qualification in Aeronautics or Mechanical or Electrical Engineering from recognised Institution plus a good computer proflclency skills and not more than 35 years of age. Possession of a certificate in stores procedure or working experience is an added advantage.

9. Assistant Chief Technician (Airframe) CONTEDISS 10

Possession of a recognized repair Spe…t Certificate in addition to attendance of an Airframe repair course from an ICAO recognized Institution plus at least nine (9) years working experience and should not be more than 45 years of age.

H. WORKS DEPARTMENT

1. HEAD OF WORKS CONTEDISS 15

The candidate must posses a good degree in any of the relevant Engineering field. Architecture or Quantity Surveyor with at least eighteen (18) years cognate experience or a Masters Degree from a recognised institution with at least seventeen (17) years cognate experience. The Candidate must be registered with a relevant professional body recognised by the Government.

2. PRINCIPAL MECHANICAL ENGINEER CONTEDISS 12

The candidate must posses a good degree in any of the relevant Engineering field with at least Nine (9) years cognate experience or a Masters Degree from a recognised institution with at least six (6) years cognate experience. The Candidate must be registered with a relevant professional body recognised by the Government.

3. PRINCIPAL ELECTRICAL ENGINEER CONTEDISS

The candidate must posses a good degree in any of the relevant Engineering field with at least Nine (9) years cognate experience or a Masters Degree from a recognised institution with at least six (6} years cognate experience. The Candidate must be regIstered with a relevant professional body recognised by the Government.

4. PRINCIPAL CIVIL ENGINEER CONTEOISS 12

The candidate must posses a gOOd degree in any of the relevant Engineering field with at least Nine (9) years cognate experience or a Masters Degree from a recognised institution with at least six (6} years cognate experience. The Candidate must be registered with a relevant professional body recognised by the Government

5. MECHANICAL ENGINEER I CONTEDISS 08

The candidate must posses a good University degree not lower than second class lower or HND not lower than two credit in Mechanical Engineering with a minimum of three (3) years working experience and NYSC discharge Certificate.

6. MECHANICAL ENGINEER I I CONTEOISS 07

The candidate must posses a good University degree not lower than second class lower or HND not lower than lower credit in the Engineering field with a minimum of three (3) years working experience and NYSC discharqe Certificate.

7. ELECTRICAL ENGINEER I I CONTEOISS 07

The candidate must posses a qooo University degree not lower than second class lower or HND not lower than lower credit in the Engineering field with a minimum of three (3) years working experience and NYSC discharge Certificate

8. CIVIL ENGINEER II CONTEDISS 07

The candidate must posses a good University degree not lower than second class lower or HND not lower than lower credit in Engineering field with a minimum of three (3) years working experience and NYSC discharge Certificate

9. ARCHITECT II CONTEDISS 07

The candidate must possess a University degree not lower than second class lower in Architecture with a Minimum of 3 years working experience and NYSC discharge Certificate or a Masters degree in Architecture.

10. QUANTITY SURVEYOR II CONTEOISS 07

The candidate must possses a good University degree not lower than second class lower in Quantity Surveyor HND not lower than lower credit in Quantity Survey and NYSC discharge Certificate.

11. MECHANICAL ENGINEER I CONTEDISS 08

The candidate must posses a good University degree not lower than second class lower or HND not lower than lower credit in Mechanical Engineering with a minimum of three (3) years working experience and NYSC discharge Certificate.

12. WATER RESOURCES ENGINEER I CONTEDISS 08

The candidate must posses a good University degree not lower than second class lower or HND not lower than lower credit in Water Resources Engineering with a minimum of 3 years working experience and NYSC discharge Certificate.

TO APPLY

Interested applicants will be required to register with an emai! address and submit their application online to www.ncat.gov.ng/career with detailed Curriculum Vitae showinq Age, Educational Qualifications, Experience, membership of professional body, Local Government or Origin, State of Origin, sex, post desired. Contact Address & phone Number, Names and addresses of three (3) referees.

NOTE: all application registration will be for a period of six (6) weeks from the date of this advertisement Only shortlisted candidates will be invited for interview,

DUE DATE: 11 April, 2016