Massive Recruitment at Jagal Group (Part II)

Jagal Group is a leading Nigerian conglomerate with operations in the Oil&Gas, Construction and Manufacturing

industries. The company has been growing successfully over the past 40 years, and has become a valuable and respected contributor to the development of the country’s economy.

Welder Foreman

Prime Responsibilities and duties

• Ability to weld all position of welding such as 3G, 4G, 6G & 6GR on SMAW/FCAW on both plate and pipe.


• Study engineering drawings and blueprints to determine materials requirements and task sequences.


• Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.;


• Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors;


• Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product;


• Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, and other types of welding arcs;


• Examining finish products and spare parts and comparing them with samples to check whether the specifications are met;


• Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments

Key Internal Interfaces

• Welding Manager


• Fabrication Manger


• Welder and other Staff

The Person

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.


• 7 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.


• Safety certificate (general) and other safety certification will be an added advantage.


• Responsible for the execution and application of the HSE procedures within his work area.


• Should have good communication skills and report writing abilities.

Rigging Foreman

• Accountable for promoting Safety.


• Plan & control work activities ensuring that a safe system of work is in place and followed during all lifting operations


• Implement all applicable company / project policies, working practices and procedures, ensuring at all times that the rigging work scope is completed efficiently, in compliance with LOLER and to a high standard of safety.


• Review and approve all lift plans developed by the site/installation rigging and moving loads function .


• Complete all work scopes in accordance with applicable workpack / jobcard instructions, associated procedures and drawings / sketches.


• Ensure job cards are completed and accurate progress reported


• Ensure time writing for the rigging and moving loads function is accurate and completed on time.

The Person

• 5-8 years’ experience in rigging in Oil & Gas / Fabrication environment.


• Previous Offshore Rigger experience is essential


• Level 3 Rigging Assessment or equivalent certification is preferred.


• Good level of verbal and written communication in English.

Scaffolding Foreman

Personnel reporting directly to this position

Purpose

• The scaffolding foreman is a working foreman


• Make sure the JSA,S and toolbox talks have been done correctly and are in place


• Make sure the scaffolders are working safely and to the right standards and procedures

Key aims and objectives

• Safety of all personnel


• Lead  scaffold  team  to erect  dismantle modify  all types  of scaffolding

Prime Responsibilities and Duties

• Make sure the work face is kept clean and tidy


• Look with supervisor where scaffold needs erecting decide what materials will be needed arrange for forklift to bring materials from scaffold yard

Other Duties

• Make sure all his team are wearing the correct ppe

Reports

• Reports any issues he has to supervisor / superintendent

Key Internal Interfaces

• Scaffolding team


• Scaffold Manager


• Superintendent

The Person

• 5+ years’ experience


• Be able to lead scaffold team


• Be able to erect dismantle modify all types of scaffolds tube and fittings and system to British standards BSEN12811-1

Pipe Fitter

Qualification

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.

Prime Responsibilities

• Trade Test Certification. 1&2 labour & productivity or Engineering background.


• Years of Experience. 4years and above.


• Good safety practices i.e.  Understanding of HSE.


• Ability to read and interprete isometric drawings, P & IDS.


• Ability to understand and interpret simple and complex pipe fabrication drawing


• Conversant with abbreviations, signs & codes.


• Ability to identify fittings & materials.


• Marking out and layout of drawings.


• Good understanding of piping spools orientation, elevations, co-ordinates & piping copping.


• Ability to take measurements, do conversions, plates & piping calculations.


• Bending of Isometric directions, preparation of plates & piping length of bevelled.


• Use of grinding machine & burning set.


• Must understand tools and equipment management.


• Must have good attitude and behaviour.


• Ability to use all fabrication /Fitting equipment and instrument


• Awareness of safety rules and standard of the industry.

Experience

• 5- 8 years minimum working experience in the fabrication field.


• Must have worked on a Pipe erection project.


• Working experience on an EPC project will be an additional advantage

Welding Supervisor

Prime Responsibilities and duties

• Ability to weld all position of welding such as 3G, 4G, 6G & 6GR on SMAW/FCAW on both plate and pipe.


• Study engineering drawings and blueprints to determine materials requirements and task sequences.


• Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.;


• Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors;


• Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product;


• Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, and other types of welding arcs;


• Examining finish products and spare parts and comparing them with samples to check whether the specifications are met;


• Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments

Key Internal Interfaces

• Welding Manager


• Fabrication Manger


• Welder and other Staff

The Person

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.


• 10 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.


• Responsible for the execution and application of the HSE procedures within his work area.


• Should have good communication skills and report writing abilities.


• Should have vase experience in fitting with good supervisory qualities.


• Safety certificate (general) and other safety certification will be an added advantage.

Rigging Supervisor

Prime Responsibilities and Duties

· Knowledge of trade terminology (i.e. lifting equipment, lifting accessories, slings, shackles, wires, ropes, chains, cables, nets etc.).
· The incumbent will make sure that gears for a lifting is conveyed to work site; and reporting of any defective rigging gear to Supervisor.
· Knowledge of types and layout of drawings such as structural, layout, plant, equipment detail drawings etc.
· Knowledge of abbreviations and drafting symbols such as lines, piping and fitting symbols, and control symbols commonly used.
· Have the ability to recognize types of lifting equipment (i.e. wire rope hoists, beam clamps, beam trolleys, plate clamps, sheave blocks, winches etc.).
· Have the ability to recognize types of lifting accessories (i.e. slings, shackles, wires, ropes, chains, cables, nets etc.).
· Have knowledge and ability to determine if lifting equipment and lifting accessories are safe to use.
· Have the ability to read and interpret, prepare and sign safety documents (i.e. PTW, Hazard Identification and Risk Assessment (HIRA), Lifting Risk Assessment (TRA) etc.).
· Have the ability to store and assemble lifting equipment and lifting accessories in a safe location
· Ability to report effectively to his superior/higher authority of any case of defective gears.

Key Internal Interfaces

· Rigging Manager
· Fabrication Manger
· Rigger and other Staff

The Person

· Relevant trade test(s) and SSCE. Higher qualifications are added advantages.
· Must possess a Rigging Certificate from a certified professional body.
· Working experience on an EPC project will be an additional advantage
· 7 years’ experience in major Oil & Gas EPC projects must possess vast Knowledge in the fabrication industry.
· Safety certificate (general) and other safety certification will be an added advantage.
· Responsible for the execution and application of the HSE procedures within his work area.
· Should have good communication skills and report writing abilities.
· Should have vase experience in fitting with good supervisory qualities

Scaffold Supervisor

Purpose

• Manage and coordinate the erection / dismantling / modification of all types of scaffolding to bsen12811-1 standard


• Be conversant with traditional tube and fitting and system scaffolding


• Show Forman scaffolder the task and make sure he has his jsa and toolbox talk in place

Key aims and objectives

• Meet with supervisors from other trades to discuss where scaffolds need erecting


• Arrange for the correct materials to be brought to the work face to complete the task


• Safety of all personel

Prime Responsibilities and Duties

• Make sure the correct use of harnesses and correct working at height procedure sg410 are being applied


• Ensure work areas are maintained in a clean and orderly manor


• Identify stop and immediately correct unsafe acts or conditions

The Person

• 10+ years’ experience


• Have an affinity to work at heights


• Be able to prepare jsa,and toolboxtalks

Structural Fitter – 1

Qualification

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.

Prime Responsibilities

• 5- 8 years minimum working experience in the fabrication field.


• Trade Test Certification. 1&2 labour & productivity or Engineering background.


• Good safety practices i.e.  Understanding of HSE.


• Conversant with abbreviations, signs & codes.


• Ability to identify fittings & materials.


• Ability to understand and interpret simple and complex structural fabrication drawing.


• Ability to use all fabrication /Fitting equipment and instrument


• Must understand tools and equipment management.


• Awareness of safety rules and standard of the industry.

Experience

• 5- 8 years minimum working experience in the fabrication field.


• Must have worked on a structural fitting   project.


• Working experience on an EPC project will be an additional advantage

Coating Foreman

• To apply your work skills in a manner which enables the Coating Department to deliver defect free product, which conforms to customer supplied specifications and Project working procedures.


• To assist the department in achieving this objective at the first attempt, within the time allowed and at each subsequent attempt.

Prime Responsibilities and Duties

• The following will be expected of you while you are in the employ of Nigerdock PLC FZE


• To take responsibility for the satisfactory execution of all work instructions issued to the workers in your team.


• To issue these instructions clearly and to ensure they are well understood.


• To ensure all work is executed according to the requirements of project and/or Nigerdock supplied working instructions.


• To ensure that you have read and fully understand the contents of the relevant working procedures, enabling you to ensure the desired  level of quality is attained .


• To ensure that you and the workers under you wear the correct level of PPE and that they work in a safe environment, utilizing correctly maintained equipment and tools.


• To pre- plan your teams work and assist the individuals in planning the execution of their instructed tasks.


• To ensure that your workers carry out tasks in an efficient manner, with all necessary consumables on hand.


• To work with your team and to be able to delegate tasks with authority and in a clear manner.


• To report all faulty equipment and take the necessary action in either fixing it or making sure that the item gets replaced if it is not repairable.


• To follow up on the progress and completion of  tasks delegated to members of your team.


• You will always assume full responsibility for all work under your control.


• To ensure and if necessary teach your team to work as a competent unit, always taking into account the safety of others working adjacent to your work area.


• To ensure that each individual executes work tasks in accordance with the requirements of the stipulated working procedure.


• To always ensure a JSA has been conducted for the proposed work and that all actions stated ate obeyed.


• To always conduct a job specific toolbox talk with your team, identifying the work hazards prior to entering the work area.


• To set an example to those working below you.

Other Duties
When not performing your primary function as a Foreman, you are expected to take part in any other activities associated with the functioning of the department.

Coating Superintendent

Purpose

• Maintenance of Equipment and Facilities;


• Supervision of all Paint Shop and Construction site coating activities Ongoing training of department personnel;


• Full responsibility for passive fire protection scope of work;


• Planning and execution of daily coating activities. 

Key aims and objectives

• To be a dedicated, responsible, pro-active and Flexible Team Player as part of a progressive unit


• Ensure ND QMS and project Quality objectives are achieved;


• Ensure good planning and execution of all activities;


• To share your knowledge and experience with the Coating Department staff compliment, by carrying out training as part of the Department’s continuous improvement plan in its quest to become a world class applicator

Prime Responsibilities and Duties

• To assist the Coating Manager and Senior Coating Superintendent in the execution of all daily activities and responsibilities assigned to you (Planning, Production, Training and Maintenance), as demanded by the daily project work scope, with frequently changing priorities;=


• Full responsibility for the successful execution of Passive Fire Proofing applications;


• Assist in creating and instituting new initiatives which can benefit the progression of the department. 

Painter

Purpose

• All inspection activities on all projects and completion of all related documentation, reports etc.


• To be a team player in the corrosion protection treatment process of fabricated structural steel structures and associated items.

Key aims and objectives

· To apply your work skills in a manner which enables the Coating Department to deliver defect free product, which conforms to customer supplied specifications and Project working procedures.
· To assist the department in achieving this objective at the first attempt, within the time allowed and at each subsequent attempt.

Prime Responsibilities and Duties

• To carry out instructions from your superiors in a  safe manner at all times.


• Assuming responsibility for the item you are painting through to the delivery stage.


• To apply paint in a manner and at the stipulated wet film thickness (WFT), adhering to project and/or Nigerdock working procedures, ensuring the desired quality in finished product is achieved.


• Your rate of production will be in line with acceptable industry norms, utilizing correctly functioning and correctly set equipment.


• As a specialist tradesman you will always be held fully responsible for the quality of your own work and you will inspect your own work for conformance.


• To always ensure your equipment is cleaned properly and to report faulty equipment immediately to your supervisor.


• To ensure that you are aware of the hazards pertaining to the tasks you are performing and ensuring that you always wear suitable PPE and use suitable equipment.


•  To act in a responsible manner and plan your working day according to instructions given to you by your superiors, ensuring that in a reasonable time allocation, you collect all PPE and equipment necessary to perform your tasks prior to you moving to the work site.


• To inform your superiors immediately if you are not capable of carrying out specific tasks due to poor health or lack of knowledge.


• When not performing your primary function as a spray painter, you are expected to take part in any other activities associated with the functioning of the department including housekeeping activities.


• To conduct yourself in a manner that satisfies the purpose of your employment at Nigerdock.

Grit Blaster

• To apply your work skills in a manner which enables the Coating Department to deliver defect free product, which conforms to customer supplied specifications and Project working procedures.


• To assist the department in achieving this objective at the first attempt, within the time allowed and at each subsequent attempt.

Prime Responsibilities and Duties

• The following will be expected of you while you are in the employ of Nigerdock PLC FZE


• To carry out instructions from your superiors in a  safe manner at all times.


• Assuming responsibility for the item you are painting through to the delivery stage.


• To carry out grit blasting activities in a manner which achieves the desired blast profiles and blast cleanliness and which adheres to the requirements project and/or Nigerdock working procedures, ensuring the desired quality in finished product is achieved.


• Your rate of production will be in line with established industry norms, using suitable equipment which is set correctly.


• As a specialist tradesman you will always be held fully responsible for the quality of your own work and you will check your own work for conformance to requirements.


• To always ensure your equipment is maintained properly and to report faulty equipment immediately to your supervisor.


• To ensure that you are aware of the hazards pertaining to the tasks you are performing and ensuring that you always wear suitable PPE and use suitable equipment.


• To act in a responsible manner and plan your working day according to instructions given to you by your superiors, ensuring that in a reasonable time allocation, you collect all PPE and equipment necessary to perform your tasks prior to you moving to the work site.


• To inform your superiors immediately if you are not capable of carrying out specific tasks due to poor health or lack of knowledge.


• You may from time to time be expected to carry out duties not associated with your normal scope of work.


• To conduct yourself in a manner that satisfies the purpose of your employment at Nigerdock.

Other Duties
When not performing your primary function as a Foreman, you are expected to take part in any other activities associated with the functioning of the department.

Paintshop Production Assistant

• To apply your work skills in a manner which enables the Coating Department to deliver defect free products, which conforms to customers, supplied specifications and Project working procedures.


• To assist the department in achieving this objective at the first attempt, within the time allowed and at each subsequent attempt.

• To carry out instructions from your superiors in a safe manner at all times.


• Assuming responsibilities of completing all tasks assigned to you in a safe manner and in accordance with the relevant project and/or Nigerdock supplied working procedures.


• To carry out any required task relating to the delivery of Blasted and/or Painted items, including but not limited to washing, cleaning, loading of grit/pot operator duties, stripe coating, housekeeping, equipment maintenance etc.


• Your daily rate of production will be satisfactory and in line with acceptable industry norms.


• As part of the production team you will always be held fully responsible for the quality of your own work and you will inspect your own work for conformance.


• To always ensure the equipment you use is cleaned properly and to report faulty equipment immediately  to your superiors.


• To ensure that you are aware of the hazards pertaining to the tasks you are performing and ensuring that you always wear suitable PPE and use suitable equipment and consumables.


• To act in a responsible manner and plan your working day according to instructions given to you by your superiors, ensuring that in a reasonable time allocation, you collect all PPE and equipment necessary to perform your tasks prior to you moving to the work site.


• To inform your superiors immediately if you are not capable of carrying out specific tasks due to poor health or lack of knowledge.


• You are expected to be prepared to learn all the trades in the department, including but not limited to Blasting, Spray Painting, paint mixing, quality control etc.


• You may from time to time be expected to carry out duties not associated with your normal scope of work.


• To conduct yourself in a manner that satisfies the purpose of your employment at Nigerdock.

You will be evaluated periodically according to the following criteria;

• Timekeeping.


• Housekeeping.


• Safety attitude.


• Ability to plan your work.


• Observation skills.


• Quality of your work.


• Quality of repair and touch up work.


• Equipment maintenance.


• Attention to detail.


• Commitment to Nigerdock, including your willingness to work overtime.

The above mentioned criteria might change from time to time as further criteria are identified which may have a positive effect on the management and quality of the processes in the department

Other Duties
When not performing your primary function as a Production Assistant, you are expected to take part in any other activities associated with the functioning of the department.

Reports
See attached Performance Management Indicator (PMI) evaluation spread sheet.

Welder – Shipyard

Job Description (but not limited to)

·         Shall be able to deposit a sound weld which will be inspected by certified welding inspector and tested for its conformity.
·         Knowledge about various welding consumables and its maintenance.
·         Up to date knowledge of welding safety and equipment safety.
·         Ability to read and understand welding procedures, specifications etc.
·         Reading of drawings and instructions, layout and fabrication of systems as request.
·         Ability to work on Carbon Steel, Arc, Cast Iron, Stainless Steel, special alloy and Aluminum etc.
·         Ability to carry out SMAW, TIG, MIG, Gas, etc welding in all positions on Pipelines, Vessels structures and equipment.
·         Ability to carry out Soldering and Brazing works.
·         Being able to qualify for the all welding procedures and standards.
·         Understand and apply the plant safety standards and maintenance procedures while performing the work.
·         In addition to his normal jobs, he should assist and participate in other maintenance activities.
·         Will be subject to internal training on safety, quality improvement tools to participate in Nigerdock continuous improvement.
·         Understands and apply safety standards and maintenance procedures while performing the work.

Educational Qualification

·         Fluent knowledge of English language (speak, read, and write).
·         Graduate certification from High School.
·         Craft Certificate from a recognized institution as welder trade (ITI certificate).
·         Holds weld certificate on welding procedures in GAS, ARC, and MIG & TIG welding to relevant ASME, BS and API codes.

Work Experience
·         Minimum eight years work experience as a Welder.
·         Ability to perform work independently work normally performed by this craft.
·         Welders shall require monitoring by contractor QA/QC program to qualify and to re qualify for welding procedures required to perform work.

Pipe Fitter Foreman

Prime Responsibilities and Duties

·         Reading and interpretation of schematic drawings of pipe systems, isometric sketches, combination drawings, construction drawings and isometric view drawings.
·         Arrangement and performing pressure testing as specified on the drawings and/or in the pressure test instructions after welding.
·         Execution of dimension control on pipe systems and checking if all accessories and fittings in the pipe system are mounted.
·         Knowledge of using hoisting tooling and flushing unit knowledge of pipe system specifications, technical and safety standards is required
·         Capable of using equipment and tools for Pipe fitting, as well as for steel construction in general.
·         Responsible for the execution and application of the HSE procedures within his work area.

Key Internal Interfaces

·         Fitting Manager
·         Fabrication Manger
·         Fitter and other Staff

The Person

·         SSCE & Vocational Trade test grade 1 & 2 certificate
·         Must have worked on a structural fitting project.
·         Working experience on an EPC project will be an additional advantage
·         Relevant trade test(s) and SSCE. Higher qualifications are added advantages.
·         5 -7 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.
·         Safety certificate (general) and other safety certification will be an added advantage.

Welding Superintendent

Purpose

• Manages and coordinate the deployment and activities of welding personnel and equipment within an assigned project or area of work


• Ensure all work activities are undertaken in compliance with HSEQ manual, Safe Work Practises, Project Specifications, Weld Procedure Specifications and relevant Codes and Standards


• Ensure efficient and effective delivery in accordance with Project Schedules

Key Aims 

• Safety of all personnel


• Ensure all activities are in compliance with HSEQ manual, Project Specifications and all relevant procedures.


• Ensure welding equipment is available and ready in accordance with project plans and schedules.


• Ensure all welders have the appropriate training, competency assessments and welding qualifications for the work to be undertaken.

Key Responsibilities

• Manage all welding and associated activities carried out within assigned work area.


• Identify manpower and equipment requirements for the assigned work.


• Allocate welding resources and equipment to work areas.


• Advise the Welding Engineer on welders’ abilities.


• Conduct surveillance monitoring of welding electrodes to be utilised in accordance with approved Weld Procedure Specifications (WPS).


• Ensure correct Weld Identifications are marked up on completed welds.


• Ensure completed welds are of satisfactory appearance/cleanliness and suitable for Visual Inspections/Non Destructive Testing (NDT).


• Ensure Daily Welding Records are raised on a daily basis for each welder and passed to the Welding Inspector.


• Request final visual inspections in accordance with Project Specifications.


• Monitor productivity, repair rates and schedule performance and be pro-active in investigating the reasons for poor performance and implementing corrective measures.


• Ensure all welding equipment is maintained in good working order.


• Ensure all equipment being used is functioning properly and has the required certification and calibrations in place.


• Ensure plant and equipment is made available for scheduled inspection and maintenance.


• Liaise with the Welding Engineer for setting up and conducting Weld Procedure Qualification Tests and Welder Qualification Tests.


• Arrange equipment and personnel to carry out weld procedure qualifications.


• Liaise with the Training Manager on Welder Training requirements.


• Report non-conformances associated with welding operations.


• Conduct random inspections of welding electrode type and size in use during production.


• Conduct random inspections of weld preparations and set-ups prior to welding.


• Ensure all welding personnel are fully aware of the importance of internal cleanliness (debris) in fabricated and erected pipework.


• Ensure all welders are conversant with the Welding Procedure Specifications to which they are working.


• Conduct random monitoring of welding controls as detailed in the Welding Procedure Specifications (WPSs) during the welding cycle.


• Notify the Welding Inspectors on completion of welded joints.


• Allocation of work fronts to Welding Supervisors.


• Ensure all welding personnel within the work area understand and operate to the required quality procedures efficiently and effectively.


• Ensure work areas are maintained in a clean and orderly manner.


• Assist and advise in the preparation of construction methods and welding sequences.


• Prepare Task Risk Assessments as required.


• Participate in Toolbox Talks.


• Identify, stop and immediately correct unsafe acts or conditions.


• Liaise with welding engineer with respect to welding development and welding procedures.


• Liaise with other craft superintendents within assigned project.


• Work with Construction Managers & Welding Superintendents on other projects to ensure the most efficient use of equipment across the facility.


• Give clear and concise instructions to team members and follow up to ensure safe and timely execution.


• Ensure good discipline is maintained.


• Hold members of the welding team accountable for work performance as per their roles and responsibilities


• Demonstrate good planning and organisation in day to day activities.


• Contribute to the Continuous Improvement Process within the operation of the welding department.


• Set professional standards of behaviour.


• Contribute to overall construction plans by considering efficient and effective methods of executing the work.


• Attend meetings as required, on time and prepared.


• Share the workload of other welding superintendents during leave rotations.


• Mentor, train and assess Nigerian national personnel under his/her control.


• Listen to and evaluate any employee concerns.

Key Interfaces

• Fabrication/Rigging/Scaffolding Superintendents/Supervisors


• QA/QC Manager & HSE Manager


• Welding Engineers


• Training Department


• Warehouse/Stores Controller & Supply Chain


• Maintenance Manager


• Client’s representatives as required


• External auditors as required 

Rigging Superintendent

Purpose

Manages and coordinates the activities of personnel engaged in rigging, movement, lifting, skidding and erecting operations and the operation of cranes, forklifts and other machinery and equipment involved. Applying the most cost effective rigging/lifting plans and lead the execution of those plans in accordance with Company Work in conjunction with Project Management Team and assist in the construction effort in /Client procedures and operating standards.

Key aims and objectives

• Ensure all rigging and lifting activities comply with HSEQ manual and applicable regulations


• Ensure that lifting equipment and personnel are planned and set up to execute lifting activities in accordance with project schedules

Prime Responsibilities and Duties

• Ensure the safe and efficient deployment of all assigned personnel and equipment


• Provide direction and make decisions in pursuit of the project goals and objectives


• Seek guidance from Rigging Manager, Construction Manager or others as necessary before making critical decisions


• Work with other projects’ personnel to ensure the most efficient use of equipment across the facility


• Ensure all personnel have been competency assessed and hold the necessary skill levels and knowledge to perform tasks assigned


• Ensure all equipment and machinery being used is functioning properly and has the required certification and colour coding in place


• Ensure the safe use and operation of all manner of lifting, pulling, skidding and hoisting equipment


• Ensure work areas are maintained in a clean and orderly manner


• Identify, stop and immediately correct unsafe acts or conditions


• Ensure plant and equipment is made available for scheduled inspection and maintenance


• Forecast tools and equipment requirements for the scope of work being undertaken


• Report equipment faults and breakdowns verbally and formally to the maintenance department


• Assist and advise in the preparation of construction methods and lifting plans


• Prepare Task Risk Assessments as required


• Lead Toolbox Talks


• Give clear and concise instructions to team members and follow up to ensure safe and timely execution


• Hold members of the rigging team accountable for work performance as per their roles and responsibilities


• Contribute to the Continuous Improvement Process within the operation of the rigging department


• Monitor productivity and schedule performance and be pro-active in investigating the reasons for poor performance and implementing corrective measures


• Demonstrate good planning and organisation in day to day activities


• Set professional standards of behavior

Other Duties

• Contribute to overall construction plans by considering efficient and effective methods of executing the work


• Attend meetings as required, on time and prepared


• Share the workload of other rigging superintendents during leave rotations


• Mentor, train and assess Nigerian national personnel under his/her control


• Listen to and evaluate any employee concerns

Key Internal  Interfaces

• Rigging Manager and other rigging superintendents


• Construction Managers and other discipline superintendents


• Equipment repair and maintenance manager


• HSEQ managers


• Training Department

Key External Interfaces

• Client’s representatives as required


• External auditors as required

The Person

• Minimum of 10-12 years rigging and lifting experience in the oil and gas construction (or other relevant) industry


• Time-served apprenticeship as a rigger in a fabrication yard with the minimum of a recognised trades or craft qualification or equivalent Diploma Conversant with LOLER and PUWER regulations and other international codes and specifications applicable to rigging and lifting Extensive knowledge of rigging activities required during the fabrication of offshore structures (jackets, piles, bridges, modules, topsides, flare towers, etc.) and have the ability to safely execute roll-ups, flip-overs, deck stacking, and all other day to day rigging and lifting activities


• Ability to demonstrate a complete understanding and show commitment to the importance of HSE and Quality in the day to day activities in a fabrication facility Conversant with the upkeep of inspections and certification records of lifting equipment Ability to mentor and train others

Scaffolding Superintendent

Personnel reporting directly to this position

• Scaffold Supervisors


• Scaffold Yard Foremen


• Scaffold Foremen

Purpose
To provide oversight on all construction projects and ad hoc Nigerdock scaffold activities

Key aims and objectives

• To Control the correct erection of all scaffolds both tube & fitting and system scaffolds.


• Supervise and lead scaffold builders for the erection and dismantling of scaffolds


• Regular verify the safety of erected scaffolding


• Develop safe work practices related to scaffolding


• Develop estimates for scaffolding erection and dismantling

Prime Responsibilities and Duties

• Inspect and certify all types of scaffold including light and heavy duty scaffolds in line with TG20:08 standards


• Able to identify faults and provide / supervise the recommended action for correction on the spot.


• Inspect and approve scaffolding materials before use.


• Provide material estimates on demand.


• Interpret drawings.


• Review and recommend for approval all scaffold work procedures


• Coaching and mentoring of employees/Estimate materials/ Planning of work activities /


• Correct Use of Harnesses / correct Working At Height Procedures (SG4:10)

Other Duties

• Control the correct use of PPE / Movement of f/lifts and scaffold trailers/ Daily reports.

The Person

• 15+ years Scaffolding Experience


• CITB / CISRS Advanced Scaffolder with Registered Card Number.


• CITB Advanced Scaffold Inspection Safety Certificate.


• Have Basic Knowledge in Designing of Conventional and System Scaffolds to BS:EN 12811-1 Standard,


• IOSH certification preferred


• Have affinity or able to work at height


• Ability to use computer and MS Office Suite


• Confident and able to work under pressure

Structural Fitter Foreman

Prime Responsibilities and duties

• Ability to understand and interpret simple and complex structural fabrication drawing.


• Ability to use all fabrication /Fitting equipment and instrument


• Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.


• Locate and mark work piece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.


• Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes


• Study engineering drawings and blueprints to determine materials requirements and task sequences

Key Internal Interfaces

· Fitting Manager
· Fabrication Manger
· Fitter and other Staff

The Person

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.


• 7 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.


• Safety certificate (general) and other safety certification will be an added advantage.


• Responsible for the execution and application of the HSE procedures within his work area.


• Should have good communication skills and report writing abilities.

Structural Fitter Supervisor  

Prime Responsibilities and duties

• Ability to understand and interpret simple and complex structural fabrication drawing.


• Ability to use all fabrication /Fitting equipment and instrument


• Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.


• Locate and mark work piece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.


• Verify conformance of work pieces to specifications, using squares, rulers, and measuring tapes


• Study engineering drawings and blueprints to determine materials requirements and task sequences.

Key Internal Interfaces

· Fitting Manager
· Fabrication Manger
· Fitter and other Staff

The Person

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.


• 10 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.


• Safety certificate (general) and other safety certification will be an added advantage.


• Responsible for the execution and application of the HSE procedures within his work area.


• Should have good communication skills and report writing abilities.


• Should have vase experience in fitting with good supervisory qualities.


• Safety certificate (general) and other safety certification will be an added advantage.

Welder

Prime Responsibilities and duties

• Ability to weld all position of welding such as 3G, 4G, 6G & 6GR on SMAW/FCAW on both plate and pipe.


• Study engineering drawings and blueprints to determine materials requirements and task sequences.


• Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.;


• Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors;


• Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product;


• Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, and other types of welding arcs;


• Examining finish products and spare parts and comparing them with samples to check whether the specifications are met;


• Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments

Key Internal Interfaces

• Welding Manager


• Fabrication Manger


• Welder and other Staff

The Person

• Relevant trade test(s) and SSCE. Higher qualifications are added advantages.


• Working experience on an EPC project will be an additional advantage


• 3 -5 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.


• Safety certificate (general) and other safety certification will be an added advantage.

Rigger

Prime Responsibilities and duties

• Responsible for the completion of rigging and erection construction workloads in accordance with project requirements and company standards.


• Responsible for carrying all work in a safe and efficient manner that prevents hazards, risks and staff confrontations.


• To complete all work according to the planned schedule and on time.


• Responsible for the safe and efficient use of all equipment and tools on site and to record their use as and when specified by the Rigging Supervisor

The Person

• 3-6 years’ experience in rigging in Oil & Gas / Fabrication environment.


• Previous Offshore Rigger experience is essential


• Level 3 Rigging Assessment or equivalent certification is preferred.


• Good level of verbal and written communication in English.

Scaffolder

Prime Responsibilities and Duties

· Should have knowledge in the erection and dismantling of most scaffold designs (Cantilever scaffolds, independent scaffold with return and mobile tower, scaffold with pre- fabricated beams and Tower scaffolds)
· Should have knowledge of safe handling and inspection of scaffold materials.
· Setting down base plates on the ground at regular intervals (these stop the upright poles slipping)
· Putting up the scaffolding poles (standards) and fixing the horizontal tubes (ledgers) to them with couples
· Fixing the scaffolding to the building or structure to make it more stable, using short ‘tie tubes’.
· Unloading scaffolding equipment at the site and any other duties assigned

Key Internal Interfaces

• Scaffolder Manager


• Fabrication Manger


• Scaffolder and other Staff

The Person

· SSCE & Trade test grade 1 & 2.
· Safety certificate (general) and other safety certification will be an added advantage.
· Must have worked on a structural fitting project.
· Working experience on an EPC project will be an additional advantage
· Relevant trade test(s) and SSCE. Higher qualifications are added advantages.
· 5 -7 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry. 

Structural Superintendent

Personnel reporting directly to this position

• Structural Supervisors


• Structural Foremen


• Structural Fitters


• Helper

Purpose

• Manages and coordinates the deployment and activities of structural fabrication personnel and equipment within an assigned project or area of work.


• Ensure all work activities are undertaken in compliance with HSEQ manual, Safe Work Practises, Project Specifications, and relevant Codes and Standards.


• Ensure efficient and effective delivery in accordance with Project Schedules.

Key aims and objectives

• Safety of all personnel.


• Ensure all activities are in compliance with HSEQ manual, Project Specifications and all relevant procedures.


• Ensure fabrication tools & equipment are available for the work scope in accordance with project plans and schedules.


• Ensure all fitters have the appropriate training and competency assessments for the work to be undertaken

Prime Responsibilities and Duties

• Manage all structural fabrication/construction and associated activities carried out within assigned work area.


• Identify in a timely manner the manpower and equipment requirements for the assigned work.


• Allocate resources and equipment to work areas.


• Allocation of work fronts to Structural Fabrication Supervisors.


• Ensure assigned work is progressing in accordance with project schedules.


• Ensure weld preparations and fit-ups are in compliance with Weld Procedure Specifications, QA/QC requirements and specified dimensional tolerances.


• Monitor productivity, fit-up and dimensional reject rates and schedule performance and be pro-active in investigating the reasons for poor performance and implementing corrective measures.


• Ensure all fabrication equipment is maintained in good working order.


• Ensure all equipment being used is functioning properly and has the required certification in place.


• Ensure fabrication equipment is made available for scheduled inspection and maintenance.


• Liaise with the Welding Superintendent on fitting and welding sequences and distortion control.


• Liaise with the Rigging Superintendent on planned fabrication sequences to ensure lifting and movements can be performed safely and efficiently.


• Liaise with the Scaffold Superintendent on planned fabrication sequences so scaffold requirements can be addressed in a timely manner.


• Liaise with Coatings Superintendent on capabilities and limitations for fabricated items requiring blast and paint.


• Liaise with the Training Manager on fitter training requirements.


• Report non-conformances associated with structural/fitting operations.


• Ensure all personnel within the work area understand and operate to the required quality procedures efficiently and effectively.


• Ensure work areas are maintained in a clean and orderly manner.


• Prepare Task Risk Assessments as required.


• Participate in Toolbox Talks.


• Identify, stop and immediately correct unsafe acts or conditions.


• Liaise with other craft superintendents within assigned project.


• Work with Construction Managers and Superintendents on other projects to ensure the most efficient use of equipment across the facility.


• Give clear and concise instructions to team members and follow up to ensure safe and timely execution.


• Ensure good discipline is maintained.


• Hold members of the fabrication team accountable for work performance as per their roles and responsibilities


• Demonstrate good planning and organisation in day to day activities.


• Contribute to the Continuous Improvement Process within the fabrication function.


• Set professional standards of behaviour.

Other Duties

• Contribute to overall construction plans by considering efficient and effective methods of executing the work.


• Attend meetings as required, on time and prepared.


• Share the workload of other superintendents during leave rotations.


• Mentor, train and assess Nigerian national personnel under his/her control.


• Listen to and evaluate any employee concerns.

The Person

• Minimum of 10-15 years of experience of fabrication/construction in the oil and gas construction (or other relevant) industry. At least 5-7 years at superintendent/supervisory level.


• Time-served apprenticeship as a fitter/plater/fabricator in a fabrication environment with minimum qualification of City & Guilds or Diploma.


• Conversant with all types of fabrication tools and equipment.


• Ability to demonstrate a complete understanding and show commitment to the importance of HSE and Quality in the day to day activities in a fabrication facility.


• Ability to lead and manage a team and to mentor and train others.

Method of Application